Iron(III) Hydroxide Polymaltose Complex Supplier

Iron III Hydroxide Polymaltose

3D Model

Iron(III)-hydroxide polymaltose complex (IPC) is very suitable for haematinic syrup formulation. Iron content is more than 30% w/w.
Iron hydroxide polymaltose is known for its high bioavailability, which means the body can absorb and utilize the iron effectively.

2-[2-[bis(carboxylatomethyl)amino]ethyl-(carboxylatomethyl)amino]acetate;iron(3+)

Iron(III)-edta
15275-07-7
Fe(III)-Edta
ethylenediaminetetraacetatoferrate(1-)
Ferric EDTA
Ferric versenate
2-[2-[bis(carboxylatomethyl)amino]ethyl-(carboxylatomethyl)amino]acetate;iron(3+)
Iron EDTA
[FeEdta](-)
[Fe(edta)](-)
Ferrate(1-), ((ethylenedinitrilo)tetraacetato)-
(OC-6-21)-((N,N’-1,2-Ethanediylbis(N-(carboxymethyl)glycinato))(4-)-N,N’,O,O’,O(N),O(N’)) ferrate(1-)
Ferrate(1-), ((N,N’-1,2-ethanediylbis(N-(carboxymethyl)glycinato))(4-)-N,N’,O,O’,ON,ON’)-, (OC-6-21)-
(ethane-1,2-diyldinitrilo)tetraacetatoferrate(1-)
(ethane-1,2-diyldinitrilo)tetraacetatoferrate(III)
Ferrate(1-), ((N,N’-1,2-ethanediylbis(N-((carboxy-kappaO)methyl)glycinato-kappaN,kappaO))(4-))-, (OC-6-21)-
Ferrate(1-), [[N,N’-1,2-ethanediylbis[N-[(carboxy-.kappa.O)methyl]glycinato-.kappa.N,.kappa.O]](4-)]-, (OC-6-21)-

Download MSDS PDF

Chemical Product and Company Identification

MSDS Name: Iron (III) Hydroxide Polymaltose Complex
Product Code: IPC2625
Relevant uses and uses advised against (if any): Laboratory and Industrial Manufacturing.

First Aid Measures

Description of first aid measures

If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact: Wash off with soap and plenty of water.
In case of eye contact: Flush eyes with water as a precaution.
If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed: The most important known symptoms and effects are described in section 11 of Documents
Indication of any immediate medical attention and special treatment needed: No data available.

Fire-Fighting Measures

Extinguishing media
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: Carbon oxides, Iron oxides
Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Further information: No data available

Exposure Controls / Personal Protection

Exposure controls
Appropriate engineering controls: General industrial hygiene practice.
Personal protective equipment
Eye/face protection: Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection:
Handle with gloves: Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands: The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection: Respiratory protection is not required. Where protection from nuisance le (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure: Do not let product enter drains.