Zinc Acetate | C4H6O4Zn | Manufacturer

3D Model

Product Name:
Zinc Acetate
Molecular Formula:
C4H6O4Zn · 2H2O
Molecular Weight:
219.51 g/mol
CAS No.:
5970-45-6
CID Code:
11192
Shelf Life:
3 years - 20°C powder
ATC Code (WHO)
A16AX05
ChemSpider ID
10719
UNII No.
H2ZEY72PME

USP
IUPAC Names
Synonyms
MSDS

USP of Zinc Acetate

Zinc acetate is best known for its potential to reduce the duration and severity of cold symptoms when used as a lozenge and is also used as a dietary supplement to address zinc deficiencies.
Zinc acetate is used as a food additive, primarily as a flavoring agent. It can enhance the taste and aroma of certain foods and beverages.

IUPAC Names of Zinc Acetate

zinc;diacetate

Synonyms of Zinc Acetate

Zinc Acetate
557-34-6
Zinc diacetate
Zinc(II) acetate
Dicarbomethoxyzinc
Acetic acid, Zinc salt
Acetic acid, Zinc(II) salt

MSDS of Zinc Acetate

Download MSDS PDF

First Aid Measures

General advice: Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact: Wash off with soap and plenty of water. Consult a physician.
In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed: The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
Indication of any immediate medical attention and special treatment needed: No data available

Fire-Fighting Measures

Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: Carbon oxides, Zinc/zinc oxides
Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Further information: no data available

Exposure Controls / Personal Protection

Control parameters: Components with workplace control parameters
Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/face protection: Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (Without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection: Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection: For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator. For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

Physical and Chemical Properties

Appearance Form: Crystalline or Granules
Color: White
Odour: Slight acetous Odour
pH (5% w/v): 6.00 – 8.0
Melting point/freezing point: 237 °C
Initial boiling point and boiling range: no data available
Sublimation Temperature: no data available
Density: no data available
Vapour pressure: no data available
Vapour density: no data available
Refractive density: 1,840 g/cm3
Water solubility: Freely soluble in water
Decomposition temperature: no data available
Viscosity: no data available
Other safety information: No data available

If you are interested on Zinc Acetate, then

REQUEST A QUOTE

Description of Zinc Acetate

Zinc acetate is a versatile chemical compound with interesting properties. Typically found in its dihydrate form (Zn (CH₃COO)₂·2H₂O), it appears as colorless crystals with a white, chalky texture. Interestingly, unlike many salts, zinc acetate is odorless. It exhibits good hydroscopic character, meaning it readily absorbs moisture from the air. On the scientific side, zinc acetate dissolves well in water, making it a useful industrial material.

Chemically, it’s a salt formed by the combination of zinc ions (Zn²⁺) and acetate ions (CH₃COO⁻). The zinc ion is surrounded by four acetate ions in a tetrahedral arrangement, giving the molecule its overall structure. This unique combination of physical and chemical properties makes zinc acetate valuable in various applications, from dietary supplements to wood preservation.

As a leading API manufacturer, WBCIL prioritizes strict CGMP and ISO quality control measures throughout the production process. The prolonged experience from 1962 ensures consistent potency, purity, and safety in every dose of WBCIL’s zinc acetate.

Application of Zinc Acetate

Pharmaceutical and Healthcare Industry

Zinc deficiency treatment: It’s used as a dietary supplement to treat and prevent zinc deficiency.
Immune support: Zinc acetate supplements can help boost immune function, especially in elderly people.

Nutraceutical Industry

Dietary supplements: Zinc acetate is formulated into tablets, capsules, and lozenges as a highly bioavailable form of zinc 3.
Cold remedies: Zinc acetate lozenges are used to manage common cold symptoms.